STRUCTURAL
STEEL DESIGN

GSE General Structural Engineering Software

STRUCTURAL STEEL DESIGN

Part of the GSE (General Structural Engineering) software, GSE STEEL DESIGN allows to verify, design and optimize the steel members of a structure as well as composite steel-concrete beams.

• Calculation of the bending, compression, tension, shear and combined resistance of steel elements.

• The program optimizes the section shapes to minimize the weight or the cost of the whole or a part of the structure. This optimization is performed based on the complete or customized list of standard section shapes or any user defined library of standard and parametric sections shapes.
• Geometrical limits can be defined to control the dimensions and properties of the section shapes selected by the optimization engine.
• The optimization engine can check various deflection criterions during the section selection process.

DESIGN IN COLD-FORMED STEEL

The latest revision of the GSE STEEL DESIGN enables structural steel designers to design cold-formed steel members based on the North American specification for the design of cold-formed steel structural members covering Canada (CSA S136-16), the United States and Mexico (AISI S100-16).Cold-formed steel sections can be mixed with regular steel shapes in a model allowing to design ​hybrid structures.

Supported section shapes:
•60° and 90° angles and 90° angles with lips
•Channel with or without lips
•Z sections with or without lips
•U (Hat) sections

​ Performed design checks:
•Tension resistance (Chapter D)
•Compression resistance including distortional buckling (Chapter E)
•Bending resistance including distortional buckling (Chapter F)
•Shear resistance (Chapter G)
•Combined forces (Chapter H)
•Web yielding and web crippling at supports (Chapter G)

•Design of steel sections or composite steel-concrete sections.
•Standard CISC, AISC or European sections or parametric section shapes (over 25 shapes available).
•All parameters required to calculate the resistance of the elements such as unbraced length, buckling lengths, buckling factors and others can be customized either graphically or from spreadsheets.
•Latest revisions of CAN/CSA S16, AISC ASD and LRFD, Eurocode 3 and 4 standards and Indian IS 800-2017.
•Singly symmetric, asymmetric and built-up section shapes are covered for all design codes.
•Limit states design of the optimized structure are presented in colors.

•Steel verification includes sections classification, resistance and stability checks according to the applicable code.
•Calculation of the bending, compression, tension, shear and combined resistance of steel and composite elements based on the results of a linear, P Delta, non-linear, seismic, dynamic or moving load analysis.
•The design of composite beams accounts for long term deflections, partial composite action, plain slab or slab cast on standard or user defined steel decks and user defined studs.
•The slab reinforcement can be considered in the calculation of the elements resistance.
•It is possible to consider the analysis of composite beams with the full composite inertia or the effective inertia in positive moment regions or the steel beam inertia in negative moment regions.
•Complete check of deflection according to a comprehensive set of criterions.

STEEL
VERIFICATION

The STEEL CALCULATOR™ is a complementary application of the GSE STEEL DESIGN.

The SAFI STEEL CALCULATOR™ allows to quickly verify, design and optimize steel beams and columns. It is also an efficient validation tool to verify design results of specific elements of complex models.

Design optimization and automatic section selection features make economic and quality steel structures a reality.

STEEL CALCULATOR™

GSE SOFTWARE PACKAGE

3D STRUCTURAL ANALYSIS AND DESIGN

The GSE General Structural Engineering software is a fully integrated analysis and design software for structural engineering.

CONCRETE DESIGN

Fully integrated into the GSE Software, discover the GSE Concrete Design application featuring the Concrete Slab design assistant SLAB ENGINEERING.

WOOD DESIGN

Fully integrated into the GSE Software, discover the GSE Wood Design application featuring Engineered wood and Light-Framed Wood design.

ALUMINUM DESIGN

Fully integrated into the GSE Software, discover the GSE Aluminum Design application for the design and verification of aluminum structures of any type.

CONTACT

  • SAFI Quality Software, Inc.
  • CANADA CORPORATE OFFICE
    3393 Sainte-Foy Road, Quebec City
    QC, G1X1S7
    CAN
  • [email protected]
  • (USA&CAN) 1 800.810.9454
  • + 1 418.654.9454
  • © 2019 SAFI QUALITY SOFTWARE, INCORPORATED. ALL RIGHTS RESERVED.